Product Description
The 30LRX Bow Light with 1 - 3 colors comes with
1 - 30LRX Bow Light that mounts in place of your stabilizer(Simply screws in the same spot as stabilizer). Has remote wired switch with low and high modes that mounts to your bow.
1 - 3 LED modules in your choice of color(Red, Green, White). The LED module determines the color of light your light will emit. Choose in the options above.
1 - Normal flashlight tail cap with heavy duty lanyard. Tail cap may look slightly different then picture.
1 - Lens cover
5 year warranty on Housing and LED, 2 years on switches and external wiring.
Please click here to see how far each color shines
Features
Focusable beam so you can go from spot beam to flood beam allowing you to put just the right amount of light on the animal without spooking it with too bright of light. The two Mode wired switch mounts to your bow so you can turn the light on at half power or full power while at full draw. The switch has two buttons on it, 1 for low mode and one for high mode. Each button can be operated as a pressure switch or on/off switch. When operated as a pressure switch it will not make any noise. When operated as a on/off switch it will make a slight click sound.
Fast focus only takes 3/4 of a turn of the head to go from full flood to full spot beam.
Interchangeable LED modules so you can easily change the color. Uses the same LED X modules and tail caps that our 38LRX, 50LRX and 66LRX light use. This light can not be converted into our 38LRX, 50LRX or 66LRX lights due to the bottom of the head being different.
Runs on 1 18650 battery.
Technical Specs
30LRX light Made out of aircraft grade aluminum
Weighs about 8.5 ounces with battery
Size = 1.4 inches across the head, 1 inch tube, 6.5 inches long when in flood beam and 7 inches long in spot beam.
Run times: Red, Green and white = 2 hours at full power with very little dimming over that 2 hours and then another 30 minutes with the light dimming over that last 30 minutes.